Instalación de cerradura eléctrica y electromagnética en Nashville, TN

Electric Strike & Maglock Installation in Nashville

Electric strike and maglock installation is a precise, code-sensitive task that goes far beyond simply mounting a lock on a doorframe. The work involves running low-voltage wiring from a power supply through the door frame or header, terminating connections at the lock body, and integrating the unit with an existing access control system, intercom, or keypad. For an electric strike, the technician must cut and fit a metal plate into the frame, align the keeper precisely with the latch, and adjust the strike depth so the door closes cleanly without binding. A maglock installation requires surface-mounting or embedding the electromagnet on the header and the armature plate on the door, then verifying the holding force is correct and the release mechanism (push-to-exit sensor, request-to-exit button, or automatic timer) functions reliably. Both systems require careful voltage testing, proper grounding, and compliance with fire and egress codes — in Nashville, the local fire marshal often inspects these installations in multi-tenant buildings and commercial spaces.

For Nashville property owners, these installations solve specific problems. Electric strikes allow you to keep a door locked during business hours while granting access via a keypad or buzzer — ideal for the rear entrances of retail stores on 2nd Avenue or the office suites in a Germantown professional building. Maglocks provide fail-safe security: during a power outage, the magnet releases, allowing free egress, which is a requirement for any building with a fire alarm system. The installation process typically takes two to four hours per door, depending on the door material (hollow metal, aluminum, or wood) and whether conduit is needed for the wiring. A skilled technician will also test for "latch throw" on electric strikes — ensuring the latch falls fully into the keeper without scraping — and confirm the maglock's holding force is at least 600 pounds for commercial doors, as recommended by ANSI standards.

Areas We Cover in Nashville

We serve properties throughout Nashville and the surrounding communities, including Amalie Point, Arbor Hills Apartments, Arbors of Brentwood, Arlington Heights, Ashlawn Place, and Ashley Park. Our technicians are familiar with the specific door hardware and access control needs at local landmarks such as #educationisnotacrime, 12th & Pine Liquor Store, 24 Church, and 4 Wheel Parts. Whether you manage a retail strip in the Gulch or a medical office near Centennial Park, we bring the tools and experience to install electric strikes and maglocks correctly on the first visit.

What to Expect

When you schedule an installation, you can expect the following: a technician arrives with the specified electric strike or maglock model, power supply, wiring, and mounting hardware. They will power down the door and existing access control, run the required wiring through the frame or header, mount and align the lock, then reconnect and test the system. The technician will also verify that the door closes evenly, the latch engages smoothly, and the release mechanism works from both the inside and outside. If the installation involves a maglock, they will test the holding force, confirm the request-to-exit sensor sensitivity, and ensure the door releases properly when the fire alarm or power interruption occurs. Finally, they will walk you through the basic operation and provide maintenance tips for the specific model installed.

Call LaFollette Door Hardware Repair today to schedule your electric strike or maglock installation. We will assess your door, suggest the right hardware, and complete the installation with minimal disruption to your business day.